Iran Tractor ITM 470, Operators Instruction Book

Page: 29 / 122

2
Controls and instruments 22
Fig. 1: Panel and instruments.
2
11
3
1
4
5
6
7
8
9
10
12
13
INSTRUMENTS
A brief explanation of the instru-
ments and warning lights is given below.
Their use and reaction during operation is
shown on pages 22 to 25.
Tachometer (1 Fig. 1)
This shows engine speed in rev/min.
The tachometer also includes an hour coun-
ter (5 Fig. 1), registering one unit for every
hour worked at approximately 1500 rev/min.
PTO speed (6 Fig. 1)
PTO speed is shown.
Fuel gauge (3 Fig. 1)
This shows the amount of fuel in the
tank.
Temperature gauge (2 Fig. 1)
This shows the temperature of the
coolant in the engine.
Fuel cut off control (13 Fig.1)
To stop the engine, pull the control
fully OUT to cut the fuel supply to the in-
jectors and stop the engine. Push the con-
trol fully in before starting the engine.
Starter switch (7 Fig. 1)
CAUTION
Always turn the starter switch to the
OFF position when the tractor engine has
stopped. Leaving the starter switch in the
Auxiliary position may overheat the warn-
ing light panel and discharge the battery.
The starter switch has four positions
- Fig. 2:
1. Off.
2. Auxiliary.
This position permits the
electrical services to be switched on
without the engine running.
3. Heat. Moving the key to the heat posi-