4
Maintenance and adjustment
65
cording to individual conditions of opera-
tion. You must establish your own times
for servicing flexible items. An average
interval time for checking is at fuel fill.
Hourmeter (Fig. 1)
The engine hourmeter shows the hours
the tractor has worked. Use the hourme-
ter to service the tractor at the correct
periods.
Fig. 1: Engine hourmeter
MAINTENANCE AND ADJUSTMENT
Preliminary Service Inspection
When your new tractor has completed
50 hours work you are entitled to a 50
hour Service Inspection which must be un-
dertaken by your Dealer. This involves a
complete check of the tractor; routine ad-
justments, checking oil levels and chang-
ing the engine oil and filters. Full details
will be found in the Tractor Service Record
Book.
Please contact your ITMCO Dealer to
agree a convenient time when this work
can be carried out.
We strongly recommend you take ad-
vantage of this facility and also be pre-
sent when the service is carried out. This
will provide an opportunity to discuss any
operational problems with the Service En-
gineer.
Routine service
This section gives full details of the
service procedures necessary to maintain
your tractor in peak efficiency. Also infor-
mation on how to make the adjustments
required in setting up the tractor for work.
In order to obtain the best results, it
is important that the tractor has regular
preventive maintenance. It is recommend-
ed that the major services (500 and 1000
hour) are conducted by your local ITMCO
Dealer under the ITMCO Recommended
Service Programme. It must be remem-
bered that the responsibility for maintain-
ing your tractor in a safe and roadworthy
condition rests with you, the owner.
Service the tractor at the intervals
shown in the following pages. Use only
high quality lubricants when servicing.
It is a recommendation that mainte-
nance is done under cover, and at the end
of an operating period so that the oils are
warm and drain easily.
• Before using a grease gun, clean the
grease fittings.
• Before removing drain and filler plugs,
clean the area around the plug and cap.
• Always use a clean container for fresh
oil or diesel.
Flexible maintenance
The term ‘Flexible Maintenance’ is
used in this publication to indicate a vari-
able service period.
Flexible maintenance times vary ac-
Summary of Contents for ITM 470
