Iran Tractor ITM 470, Operators Instruction Book

Page: 104 / 122

4
Maintenance and adjustment
97
package and to gain access to panel, slack
the bolts and remove of them. Pull out the
sockets and remove the panel. For more
information please contact with ITMCo.
dealer.
Fig. 64: Opening the instrument panel.
Fig. 65: Opening the instrument panel.
Fig. 66: Panel sockets.
Plough light bulb (Fig. 67)
Switch off the light.
1. Remove the four screws (1) and the
rim (2).
2. Ease the light unit out of the body by
inserting a finger through the hole at
the base of the body and moving the
unit forward until it can be lifted out.
3. Remove the spring clip (3) from the
back of the bulb holder, then remove
the bulb (4).
4. Fit a new 55 watt halogen bulb and re-
assemble the light.
IMPORTANT
The plough light has a halogen bulb.
Never touch a halogen bulb lens with the
fingers. Natural moisture in the skin will
cause the bulb to burn out when the light
is switched on. Always use a clean cloth
or tissue when handling halogen bulbs.
Fig. 67: Plough light.
2
3
4
1
FENDER LIGHTS
Rear and side light bulbs
The figures illustrate the replacement
of the rear, side and number plate bulbs