Iran Tractor ITM 470, Operators Instruction Book

Page: 19 / 122

General information
1
12
disengage the PTO, stop tree engine, re-
move the key , and make sure that the PTO
driveline has stopped.
Fig. 19: Protection and cover of P.T.O.
1
2
It is a legal requirement that PTO
guards are used at all times, ensure that
the PTO shield (1) is in place and that the
PTO cap (2) is fitted when the PTO drive-
line is not in use.
points:
1. Always use a safety cage if available.
2. Do not stand over the tyre.
3. Use a clip-on chuck and extension hose
when inflating a tyre.
Ballast
Steering and braking performance can
be considerably affected by attaching im-
plements. To maintain the required ground
contact pressure, ensure that the trac-
tor is ballasted correctly. Advice can be
sought from ITMCO Dealer.
Fluid ballasting
When preparing a calcium chloride
solution for fluid ballasting the tractor
tyres, NEVER pour fluid onto the calcium
chloride. A chlorine gas can be generated
which is poisonous and explosive. This
can be avoided by slowly adding calcium
chloride flakes to water and stirring until
they are dissolved Wear suitable protec-
tive clothing, gloves, eye/face protection.
Power takeoff (P.T.0.)
Before attaching, detaching, clean-
ing or adjusting PTO driven implements,
Fig. 18: Re-inflate of tires.
Inflation beyond this maximum pres-
sure may break the bead , or even the rim,
with a dangerous explosive force. If both
beads are not seated when the maximum
recommended pressure is reached, deflate,
reposition the tyre, relubricate the bead,
and reinflate. Observe the following safety