Intermec CK1 Serial Dock, User Manual

Page: 41 / 147

Chapter 2 — Configuring the CK1
30 CK1 Handheld Computer User’s Manual
6
Press Enter to accept your changes and return to the System
Setting screen.
7 Save your changes and exit the System Setting screen. For
help, see “Saving Your Changes and Exiting the System
Setting Screen” on page 39.
You can now configure other CK1 functions or run an
application.
To change the font size that appears on the screen from 6x8 to
6x16, add the change to your application on the CK1. For help,
see the
CK1 SDK Programmer’s Reference Manual (P/N 073771).
Configuring Bar Code Symbologies
The following procedure explains how to configure the bar code
symbologies settings on the CK1.
To configure bar code symbologies
1
From the System Setting screen, press
X
to highlight the
Barcode icon, and press Enter . The Barcode screen appears.
Barcode
Min Digit:
Max Digit:
Setting
UG
Code39 125
Enable
Full ASCII
Check Digit
Send Check Digit
Send Start/Stop
0
48
X
X
X
2 Press
X
or
W
to select the tab for the bar code symbology you
want to configure.
3
Press
S
or
T
to select the option buttons or check boxes you
want to change, and press Space to change them. See the next
section, “Symbology Options,” to understand the options for
each symbology.
4 Press Enter to accept your changes and return to the System
Setting screen.