Intermec CK1 Serial Dock User Manual Download Page 102

Page: 102 / 147

Chapter 5 — Managing the CK1

CK1 Handheld Computer User’s Manual

Disk and Memory Space

Space

Description

Effects of Size Used

Disk

Flash file system available for
application

Limits the size of files and
applications you can load on
the CK1.

Memory

SDRAM shared between the
CK1 operating system,
applications, and RAM

The larger the Used size, the
less RAM available for the
application to use. Performance
can be affected.

To check the disk space

From the Main screen, enter the Setup screen.

Press

to highlight the Barcode application icon.

Press

and hold for 3 seconds. You are prompted for a

user name and password.

Enter the user name and password, and press

Enter

. The

default user name is

ck1

, and the default password is

agsy

The user name and password are case sensitive. The Setup
screen appears.

Press

to highlight the Info icon, and press

Enter

. The

System Information screen appears.

SYSTEM INFORMATION

Memory

Disk

Infos

FW Ver

Press

Enter

. The Disk Information screen appears.

Summary of Contents for CK1 Serial Dock




















































































































































Search results

Summary of Contents for CK1 Serial Dock

Reviews:

Related manuals for CK1 Serial Dock

Brands by name

Popular brands

Intermec CK1 Serial Dock, User Manual

Search results

Summary of Contents for CK1 Serial Dock

Reviews:

Related manuals for CK1 Serial Dock

Brands by name

Popular brands