Intermec CK1 Serial Dock User Manual Download Page 104

Page: 104 / 147

Chapter 5 — Managing the CK1

CK1 Handheld Computer User’s Manual

MEMORY INFORMATION

Total Size:
15114240 Bytes:

Used Size:
13066240 Bytes

Free Size:
2048000 Bytes

Infos

Press

Esc

to return to the System Information screen.

To check the disk space, see the previous procedure.

To return to the Setup screen, press

Esc

Finding Information on the CK1 Firmware

You can find the following information about the CK1
firmware:

• Bootloader version

• Writer version (versions for the NOR and NAND Writers)

• BIOS version

• Diagnostic version

• Kernel version

• Root version

• User version

To find information on the firmware

From the Main screen, enter the Setup screen.

Press

to highlight the Barcode application icon.

Press

and hold for 3 seconds. You are prompted for a

user name and password.

Enter the user name and password, and press

Enter

. The

default user name is

ck1

, and the default password is

agsy

The user name and password are case sensitive. The Setup
screen appears.

Summary of Contents for CK1 Serial Dock




















































































































































Search results

Summary of Contents for CK1 Serial Dock

Reviews:

Related manuals for CK1 Serial Dock

Brands by name

Popular brands

Intermec CK1 Serial Dock, User Manual

Search results

Summary of Contents for CK1 Serial Dock

Reviews:

Related manuals for CK1 Serial Dock

Brands by name

Popular brands