Intermec CK1 Serial Dock, User Manual

Page: 30 / 147

Chapter 1 — Learning About the CK1
CK1 Handheld Computer User’s Manual 19
Using the CK1 Scanner
Do not look directly into the window area or at a reflection
of the laser beam while the laser is scanning. Long-term
exposure to the laser beam can damage your vision.
Avertissement: Ne regardez pas directement la réflexion
d’un rayon laser ou dans la fenêtre du laser lorsque celui-ci
est en opération. Si vous regardez trop longtemps un rayon
laser, cela peut endommager votre vue.
You use the scanner to scan and enter bar code data. When you
press the
Scan button, the scanner emits a beam of laser or linear
imager light that is visible on a bar code label as you scan it. The
CK1 decodes the bar code label and enters the data you scanned.
When you unpack the CK1, these bar code symbologies are
enabled:
• Code 39
• Code 128
• UPC/EAN
• Interleaved 2 of 5
• EAN 128
If you are using bar code labels that are encoded in another
symbology, you need to enable that symbology on the CK1. For
help, see “Configuring Bar Code Symbologies” on page 30.
To scan a bar code label with the scanner
1 Turn on the CK1.
2 Hold the CK1 at a slight angle a few inches from the bar code
label. The scanner must be pointing toward the label.
3
Push the Scan button on the keypad.
If your CK1 has a laser scanner, a narrow beam of light
appears near the bar code.
If your CK1 has an imager, a wide beam of light appears near
the bar code.