Intermec CK1 Serial Dock User Manual Download

Page: 105 / 147

Chapter 5 — Managing the CK1

CK1 Handheld Computer User’s Manual

Press

to highlight the Info icon, and press

Enter

. The

System Information screen appears.

SYSTEM INFORMATION

Disk

Infos

FW Ver

Memory

Press

to highlight the FW Ver icon, and press

Enter

. The

Firmware Version screen appears.

BootLoader:

Infos

BIOS:

Writer:

Diagnostic:

kernel:

rootfs:

usrlocal:

010200

Press

Esc

to return to the System Information screen.

To return to the Setup screen, press

Esc

Rebooting the CK1

The following procedure explains how to reboot the CK1.

To reboot the CK1

Press and hold

–

until you are prompted for a user name

and password.

Enter the user name and password, and press

Enter

. The

default user name is

ck1

, and the default password is

agsy

The CK1 boots and automatically runs the application
configured to automatically run or displays the Main screen.

Summary of Contents for CK1 Serial Dock




















































































































































Search results

Summary of Contents for CK1 Serial Dock

Reviews:

Related manuals for CK1 Serial Dock

Brands by name

Popular brands

Intermec CK1 Serial Dock, User Manual

Search results

Summary of Contents for CK1 Serial Dock

Reviews:

Related manuals for CK1 Serial Dock

Brands by name

Popular brands