Intermec CK1 Serial Dock, User Manual

Page: 100 / 147

Chapter 5 — Managing the CK1
CK1 Handheld Computer User’s Manual 89
• Read the Remaining power line to find out what percentage
of power is left in the battery. If the power is below 10%,
replace or charge the battery.
• Press
T
to select the Enable APM (advanced power
management) option button, and press Space to select or
clear the button.
• Press
T
to select Standby , and press
X
or
W
to select how
many minutes the CK1 will be in Standby mode before
turning off: 1, 2, 3, 5, or 10 minutes. The less time the CK1
spends in Standby mode, the longer the battery lasts.
3 To return to the System Setting screen, press Enter .
Entering Linux Commands on the CK1
If you want to enter Linux commands on the CK1, you need to
enter the Shell screen.
For information on Linux commands, see a Linux manual or
guide, such as the
Red Hat Linux Getting Started Guide available
on www.redhat.com.
To enter the Shell screen
1 From the Main screen, enter the Setup screen.
a
Press
T
to highlight the Barcode application icon.
b
Press F1 - 1 and hold for 3 seconds. You are prompted for a
user name and password.
c Enter the user name and password, and press Enter . The
default user name is
ck1
, and the default password is
agsy
.
The user name and password are case sensitive. The Setup
screen appears.
2
Press
X
to highlight the Shell icon, and press Enter . The
Shell screen appears.