Intermec CK1 Serial Dock, User Manual

Page: 15 / 147

Chapter 1 — Learning About the CK1
4 CK1 Handheld Computer User’s Manual
To use the CK1 for the first time
1 Install and charge the battery. For more information on
batteries, see “Using the CK1 Battery” on page 4.
2 Turn on the CK1. For more information on the keypad, see
“Using the Keypad” on page 11.
3
(Optional) Set the time and date. For help, see “Configuring
the Date and Time” on page 28.
4 (Optional) Configure TCP/IP settings for a serial connection.
For more information, see “Configuring PPP
Communications” on page 57.
5 Enable the bar code symbologies that you want to be able to
scan. For help, see “Configuring Bar Code Symbologies” on
page 30.
6
Save your configuration changes to flash memory. For help,
see “Saving Your Changes and Exiting the System Setting
Screen” on page 39.
7 Start an application. For help, see “Starting an Application
From the Main Screen” on page 47.
When you are done with these steps, the application you have
chosen starts. You are ready to use the CK1.
Using the CK1 Battery
The lithium-ion battery that is used in this device may
present a fire or chemical burn hazard if it is mistreated. Do
not disassemble it, heat it above 100
°
C (212
°
F), or
incinerate it.
Avertissement: Le paquet de piles d’ions de lithium qui est
utilisé dans cet appareil peut presenter un risque feu ou un
risque chimique de brûlure s’il est maltraité. Il ne faut pas le
désassembler, le réchauffer à une température plus élevée
que 100
°
C (212
°
F) ou l’incinérer.
The main power source for the CK1 is a lithium-ion battery
(P/N 073659). When you change the battery, a backup power
source maintains the CK1 status, memory, and real-time clock
for at least 15 minutes.