Intermec CK1 Serial Dock, User Manual

Page: 25 / 147

Chapter 1 — Learning About the CK1
14 CK1 Handheld Computer User’s Manual
Setting
L
Lock area with L
3
Press a numeric key. The lowercase characters available for
that key appear in the status bar.
For example, press 9 to have ghi9- appear in the status bar.
Setting
L
ghi9-
4
Press the numeric key until the character you want is
highlighted, and select the character by:
• waiting 2 seconds.
• pressing another key.
• pressing Enter .
5 Press another numeric key to type another character, or press
Enter to move to another field.
To return to Numeric Input mode, press Lock so that the
Lock area of the status bar is blank.
Using the Power Key
The Power key is in the middle of the bottom row of the
keypad. When you press the Power key to turn off the CK1, the
CK1 does not actually shut off but goes into a Suspend mode. In
Suspend mode, the CK1 continues to power all memory and
turns off the power to most of the hardware. This mode is
referred to as “off” in the rest of this manual.
Using the Screen
You can use the CK1 screen to view data, run applications,
monitor the CK1 status, and perform many other functions.
The screen is a backlit liquid crystal display (LCD) that has a
maximum of 16 lines by 20 characters. The screen also supports
double-byte characters and user-programmable fonts.
To make the screen easier to see, you can turn on the backlight
and adjust the contrast.