Intec Printing Solutions - Manual for ColorCut LC600 Sheet fed Label Cutter ........................................................................ Page No: 39
The MENU settings & options
The Menu screen allows you to check
settings or change options on your Intec
ColorCut LC600 cutter.
B
Press the
MENU
TAB, to select the
menu screen. The
MENU
TAB
changes
color to a solid purple color, to show you
have selected that option.
In the Menu mode, the cutter status
changes to [OFF Line]
C
and will no
longer receive new cutting files. When
you have finished changing the menu
settings press the
[
ON-LINE
]
D
Key
to return the cutter to the HOME screen,
and change the LC600 cutter status back,
to ONLINE.
When the main '
MENU
' screen is displayed, the options available will be displayed in
the LCD panel screen. Press the
DOWN
arrow button
H
on the key pad to scroll
down the list. Press the
UP
arrow button
E
on the key pad to scroll up the list.
If an Item displays the symbol next to it, this indicates you can press the
ENTER
key
F
to select the item to set the parameters.
If an Item displays the
symbol next to it, this indicates you can toggle through
the options by pressing the
LEFT
G
or RIGHT
arrow keys
I
to change the
settings.
There are 2 MENU modes, DEFAULT which provides the typical settings required. And
ADVANCED, which displays additional advanced settings which do not normally need
to be changed. Each menu option is described later in this manual.
6.1 THE CONTROL PANEL (Cont.)
②
③
④
⑤
⑥
⑦
⑧
ON LINE
/OFF LINE
ENTER
①
MENU MODE: DEFAULT
MENU MODE: ADVANCED
CAMERA to TOOL OFFSET
CAMERA to TOOL OFFSET
LED:
Enabled
/ Disabled
LED:
Enabled
/ Disabled
Menu Mode:
Default
/ Advanced
Menu Mode: Default /
Advanced
Firmware Ver:
FW1.00.04
Firmware Ver:
FW1.00.04
Scale Check & Calibration
Fan Setting:
1,2,3
Sensor Check
Reset To factory Defaults
