Intec Printing Solutions - Manual for ColorCut LC600 Sheet fed Label Cutter ........................................................................ Page No: 30
Chapter 4. Connecting and powering on the cutter.
1.
Securely plug the power cord into the mains socket
B
on the rear panel and
connect to an electrical outlet of the specified voltage.
2
.
Turn on the power using the mains switch
C
.
3.
The LCD Panel will illuminate and the Intec Logo will be displayed
D
, after approx
5 secs, the cutter will emit a beep sound and the tool carriage will move the
the far left position
F
(If not already in that position). The main control system
will then boot, and the Wi-Fi function will initialise. After approx 35 -40 secs, the
illumination strip under the front cover will illuminate
E
and the
HOME
screen will
be displayed on the LCD panel
F
. Once the
HOME
screen is displayed on the
LCD panel the cutter is Online and ready to use.
B
C
D
E
F
4.1 Turning the cutter on (The Initialisation Process)
ON LINE
/OFF LINE
ENTER
F
30 - 40 secs
initialisation
