Intec Printing Solutions - Manual for ColorCut LC600 Sheet fed Label Cutter ........................................................................ Page No: 32
4.3 ColorCut Pro - USB Connection confirmation (Cont)
4) When the ColorCut Pro
application launches, click
on the SETTINGS button
B
.
The ColorCut Pro [
Settings
]
dialogue box will appear.
A number of options and
settings can be viewed or
changed here.
IF the connection to your cutter is successful
then under the Output Device option
C
you will
see the term USB Printing Support.
(After a short delay, the identifier 'LC600' may
appear after the description 'USB Printing
Support', however you don't need to wait for
this, and this may take a few minutes to appear).
Alternatively, IF the [
OUTPUT DEVICE
]
option shows, [
File Output]
D
then the USB
connection has not been recognised.
Switch off the cutter and wait 10 secs. Unplug
the USB cable from your computer, and try a different port, then switch back on the
ColorCut engine. Wait unit the HOME screen is displayed on the LC600 LCD panel.
4.4 ColorCut Pro - Device Type
After confirming the USB connection is
connected successfully, please ensure the
DEVICE
type is selected as
LC600
E
.
(This is not automatic, you need to select
your cutter as LC600). Click [OK] to confirm
and close the settings dialogue box.
Now continue to Step 5 (Tools).
B
C
D
E
