Intec Printing Solutions - Manual for ColorCut LC600 Sheet fed Label Cutter ........................................................................ Page No: 20
You can now skip to the section on Installing ColorCut Pro and calibrating your LC600
cutter.
However, if you do not have an Internet connection then follow the steps on how to set
up a direct connection to the Cutter without requiring an internet connection or router.
(Wi-Fi Direct Access Point following.)
Daily Operation - Enabling Windows Wi-Fi HotSpot.
10
. During daily operation you can now enable the connection to your Intec LC600
cutter by simply clicking on the Wi-Fi icon in the Windows task bar
M
(Bottom
right of your screen).
Next click on the Mobile
HotSpot button
N
that
appears in the lower right
corner of the ‘
Network and
Internet settings’
Dialogue
box/menu that appears.
The Mobile HotSpot button will
change color when it is activated,
and indicate the SSID name
(H3), and how many devices are
connected.
O
After enabling the mobile Hotspot,
ensure you power ON the Intec
LC600 cutter, and allow 30 secs
- 2mins for it to connect to your
HotSpot. Your Mobile HotSpot
will show when the device is
connected.
P
M
N
O
P
