Intec Printing Solutions - Manual for ColorCut LC600 Sheet fed Label Cutter ........................................................................ Page No: 47
Changing the Dual Grip Roller
4.
Having released the Dual Grip Levers
you can move the Dual Grip bar
towards the left
D
side (in to the LC600
chassis) and then diagonally up
E
.
5.
Replacing the Dual Grip Roller is
the opposite procedure, diagonally
fit the new bar towards the left and
then down into position.
6.
Finally close the Dual Grip Lever clamps
B
to
secure the Dual Grip Roller.
The ball catch
C
will click back to
secure the levers in place as you close
the levers.
ON LINE
/OFF LINE
ENTER
D
E
B
C