Installation
INSYS Modem 56k small EU 2.1
18
9
Installation
This chapter describes how to mount the INSYS Modem 56k small EU 2.1 to a DIN
rail, connect it to the power supply and disassemble it again.
Danger!
Exposed electrical components!
Risk of death through electric shock hazard!
Prior to the installation, switch the power of the cabinet
off and secure it against being switched on again.
Danger!
Moisture and liquids from the environment may seep
into the interior of the INSYS Modem 56k small EU 2.1.
Risk of death through shock hazard when touched!
The INSYS Modem 56k small EU 2.1 may not be used in
wet or damp environments, or in or very close to water.
Install the device at a dry location, protected from water
spray. Switch the power supply off before you do any
work on a device which may have been in contact with
moisture.
Note
The device could be destructed if the wrong power sup-
ply is used.
If the INSYS Modem 56k small EU 2.1 is used with a
power supply which has a larger voltage than the al-
lowed operational voltage of the INSYS Modem 56k
small EU 2.1, the device is destroyed.
Make sure that you use the suitable power supply. The
Chapter "Technical Data" has the information about the
correct voltage range for the INSYS Modem 56k small EU
2.1.
