S Registry
INSYS Modem 56k small EU 2.1
72
S86
Error event code
When a connection fails (
NO CARRIER
), an event code is written into this regis-
ter.
S86=0
Normal disconnect, no error
S86=4 Carrier
lost
S86=5
No establishing of an error-corrected (V.42) connection
S86=6
No extensions could be negotiated
S86=7
Remote terminal only supports synchronous modems
S86=8
No joint framing detected
S86=9
No protocol could be established
S86=10
Invalid answer when negotiating extensions
S86=11
No synchronous marks received from remote terminal
S86=12
Normal disconnection by remote terminal
S86=13
Remote terminal didn’t respond any more (ten attempts)
S86=14 Protocol
error
S86=15 DTR
drop
S86=16
Remote terminal demanded cleardown (GSTN cleardown)
S86=17
Inactivity timer expired
S86=18
Desired speed is not supported
S86=19 Long
space
disconnect
S86=20
Key abort (character was sent during connection setup)
S86=22
No connection setup possible
S86=23
Cleardown after 3 retrains
S86=25
Termination of the connection by the remote terminal or by a phone
connected in series
S86=26
Remote terminal hung up
S91
Transmit level
The value for the transmit level of the modem is stored in the S91 register. The
value can be configured between 0 and 15. The connection can in some cases be
improved by decreasing the transmit level.
S91=0
Transmit level -1 dBm
S91=15
Transmit level -16 dBm
Note:
The range and the default value depend on the country settings
(
AT+GCI
)
