INSYS Modem 56k small EU 2.1
Operating Principle
25
5.
Save your entries with
AT&W
.
Not all settings at the INSYS Modem 56k small EU 2.1 must be actively
stored by entering
AT&W
. Some settings are automatically saved immedi-
ately. We still recommend to send the command
AT&W
to the INSYS Mo-
dem 56k small EU 2.1 as your last configuration step to ensure that all set-
tings are stored safely and are available for the next restart.
11.2
Operation with HSComm
Use the software HSComm to easily configure the INSYS Modem 56k small EU 2.1.
HSComm offers an interface for the parameters of the most important AT com-
mands of the INSYS Modem 56k small EU 2.1. The operation is mostly self-
explanatory. You can download the software from the INSYS MICROELECTRONICS
homepage (www.insys-tec.de).
Configuration and settings of the INSYS Modem 56k small EU 2.1 with HSComm
How to configure the INSYS Modem 56k small EU 2.1 with the software
HSComm.
The INSYS Modem 56k small EU 2.1 is connected to the PC and switched on.
The software HSComm Modem is installed on the PC.
1.
Start the program HSComm Modem.
The program starts.
A message window "Read settings..." is displayed.
The program will now search for a connected INSYS Modem 56k small EU
2.1 and will attempt to read the settings.
After a short time, the settings are read out. A status message "Settings
read." appears.
2.
Click OK in the status message.
3.
Enter the required settings.
4.
Afterwards, click on Send (page 26, Figure 5, position 21).
A dialog box with the message "Modem settings are sent" is displayed.
The entered settings are sent to the INSYS Modem 56k small EU 2.1 and
stored.
A dialog box with the message "Modem settings sent" is displayed .
