AT Command Reference
INSYS Modem 56k small EU 2.1
60
Command
Description
ATZ<n>
Software reset
The command causes the INSYS Modem 56k small EU 2.1 to perform a software reset.
The INSYS Modem 56k small EU 2.1 loads (depending on parameter) the default setting
saved by the user. If no parameter is specified, the user default 0 is loaded.
ATZ0
Software reset; afterwards the user default 0 is loaded.
ATZ1
Software reset; afterwards the user default 1 is loaded.
AT&Z<n>
Saving telephone numbers
The command saves four entries permanently in the EEPROM. Each entry may consist
of up to 35 characters. The entries may be overwritten and must comply with the dial-
ing string as described in the
ATD
command.
AT&Z<n>=xxx
n
Is the number of the entry in the list (from 0 to 3).
xxx
Is the dialling string with the phone number.
<Pause>
+++
<Pause>
Changing from data mode to command mode (online command mode)
1 second pause before and after the entry, no Carriage Return -
<CR>
-. After the re-
sponse "
OK
", an additional waiting period of 1 seconds for the re-entry of
AT
commands
must be observed.
