S Registry
INSYS Modem 56k small EU 2.1
64
16
S Registry
S registers may be read and written using the
ATS<n>
command. (Refer also to
the AT Command Reference). Certain S registers may only be read; others only al-
low to enter a particular range of values.
If the range of values is exceeded, the modem will report
OK
, although the value
was not accepted. We therefore recommend to immediately check modifications
by reading (
ATS<n>?
).
Note:
*
These registries are stored in the user defaults with
AT&W0
or
AT&W1
.
**
The defaults can differ depending on the configured country code.
