Installation
INSYS Modem 56k small EU 2.1
20
Disassemble the device from the DIN rail
Instructions on how to disassemble the INSYS Modem 56k small EU 2.1
from a DIN rail in a cabinet:
You will need a flat tip screwdriver with a 4.5 mm blade.
The power supply of the cabinet is switched off and secured against being
switched off accidentally.
All cables at the INSYS Modem 56k small EU 2.1 are disconnected.
Danger!
Exposed electrical components!
Risk of death through electric shock hazard!
Prior to the installation, switch the power of the cabinet
off and secure it against being switched on again.
1.
Insert the flat tip screwdriver into the flexible snap-in hook of the INSYS Mo-
dem 56k small EU 2.1 as shown in the diagram.
2.
Turn the flat tip screwdriver into the direction of the INSYS Modem 56k small
EU 2.1 as shown in the diagram.
