Inmes IM-300PL AL, Operator'S Manual

Page: 16 / 66

Fig. 12
5. 3 – Lubricant oil level
The products developed by Inmes offer long durability and high performance, in order to guarantee total
satisfaction of our customers. Our quality control department test every machine before it be packaged. However,
they are delivered without pneumatic oil which it is recommended to be refuel. Follow the instructions below to
refuel:
1) Shut air supply 01 (Fig. 13);
2) Unscrew the filter glass by turning clockwise direction, 02 (Fig. 13);
3) Fill the container with pneumatic oil, just more than a half;
4) Screw the lubricator glass back on making sure the O-ring is sitting correctly in the housing.
The number of drops of pneumatic oil is adjusted at the factory. It is usually unnecessary to adjust after-
wards. We recommend the customers verify that after every 25to30 actions of the foot pedal ONE drop should
fall. In order to ajust the lubricator, proceed as follow:
Turn the knob 03 fig. 13 until it is completely closed. And then
open it back about 1/4 to reach the correct adjustment. Finally make
sure that after every 25to30 actions of the foot pedal ONE drop should
fall.
Make sure to use pneumatic oil according to ISO VG 10.
Fig. 13
INMES Industrial Ltda – Double Miter Saw IM-300PL 15