Inmes IM-300PL AL, Operator'S Manual

Page: 8 / 66

1 . 3 - Blade requirements
Saw blade must follow the specifications bellow:

External diameter (A): 300mm;

Saw blade hole(B): 25,4 or 30 mm;

Maximum thickness(C): 3,4mm;

Saw blade rotation: at least 3400rpm;

Appropriated for each specific material (wood, plastic or alumi-
num).
Fig. 01
1 . 4 - When installing the machine

The machine must be mounted on a flat surface in an appropriate work area, well lighted and enough air;

In order to move the machine make sure to use a forklift as
shown in fig. 02.

Inmes Industrial does recommend to install a circuit breaker* of
15A (IEC Standard) for machines 220/380V threephases, and a
circuit breaker* of 25A (IEC Standard) for machines singlephas-
es/Dualphases. Make sure to have this equipment installed before
plugging to electricit and also, make sure the circuit is properly
grounded using the green/yellow wires.
* The circuit Breaker is not supplied with the machine. Fig. 02

Before switching on the machine verify the local frequency and voltage complies with your machine;

The electrical installation must be made by an electrician as well as questions or problems you may have
with your electrical installation should be resolved by an electrician.
1 . 5 - Before each use

Make sure before operating that all parts and connections are tight;

Remove any existing foreign objects or tool placed on the machine;

Verify blade spreader before start the machine and make sure the blades are in a good shape.
INMES Industrial Ltda – Double Miter Saw IM-300PL 7