Inmes IM-300PL AL, Operator'S Manual

Page: 18 / 66

6. 2 – Safety Shields Adjustment
The IM – 300P has a hand protection system that provides maximum safety while working. Follow the in-
struction bellow as requirement to the safety shields work properly:
1) Loosen the handle 01;
2) Position the shields (02) up or down, just over the frame
to be cut, fig. 16;
3) Tighten the handle 01.
Fig. 16
6. 3 - Clamping System
Position the moulding and proceed as follow:

Loosen the handle 01 (Fig. 17);

Position the clamping system over the frame, leaving a 10 mm gap (Fig. 18 e 19).

Tighten the handle 01;

Make sure the workpiece be pressed against the fence as shown in fig Fig. 20.
Fig. 17 Fig. 18 Fig. 19
D A N G E R

Do not operate the saw without the safety guards in place and adjusted.
INMES Industrial Ltda – Double Miter Saw IM-300PL 17