Inmes IM-300PL AL, Operator'S Manual

Page: 12 / 66

Important:

Before assembling the machine, make sure that you have all parts that are included with the machine

If you are missing any part described above, do not assemble the saw and immediately contact the dealer that
you have purchased the machine

Whenever it is necessary to order spare parts use the exploded view of part list that can be found by the end
of this instructions manual. Always order parts by their codes.

This instructions manual will be extremely important to order parts when its make necessary, therefore make
sure to keep it in an appropriate place. In case that you have more than one equipment with the same model,
identify it by the serial number on the page 02.
2. 2 -
Optional accessories

Dust Colector;

Right arm Extension;

Left arm extension;

Additional right arm extension;

Moulding Stop (Flip-Flop).
W A R N IN G
If you are missing any part described above, do not assemble the saw and
immediately contact the dealer that you have purchased the machine
CAUTION

This is a heavy saw, to reduce the risk of injury the manufacturer recommends to use a forklift to make any
movement as shown in fig. 02. Place the saw on a secure stationary work surface and look the saw over care-
fully.

The ground, on which the machine has to be loaded, must be perfectly flat.
D A N G E R

To reduce the risk of injury
from unexpected starting or
electrical shock, do not plug
the power cord into a power
source outlet during unpacking
and assembly.
INMES Industrial Ltda – Double Miter Saw IM-300PL 11