Inmes IM-300PL AL, Operator'S Manual

Page: 57 / 66

INMES Industrial ltda – Double Miter Saw IM-300P/ PL 60
The electric-pneumatic valve leaves the factory with to wires pre assembled. Make sure the wires
connection matches with you machine´s voltage. It can be the number 04 and 37 or 0 and 37 (double
check the electric diagram). The wires 0 and 04 must be connected on the other valve, while the wire
number 37 must be connected on the universal control, as shown in Fig. 06.
Fig. 06
In order to install the pneumatic hoses, follow the pneumatic diagram.
So, connect them as show in Fig. 07.
Fig. 07
21.2 – INSTALLING THE FLIP-FLOP SWITCH
1) First of all, placed the switch 01 as show in fig. 08.
2) Then tighten the key with the part 01 (Fig. 09).
Fig. 08 Fig. 09
W A R N IN G