Inmes IM-300PL AL, Operator'S Manual

Page: 7 / 66

1 - SAFETY INSTRUCTIONS
For operator safety and durability of your equipment, the instructions described in this manual must be
carried out with great care when installing and operating your machine, staying alert and learn how to use the IM-
300PL.
1 . 1 – Safety Signals
It means if the safety instructions are not followed the operator could be seriously injured or
killed.
If the safety instructions are not followed the operator will be seriously injured.
Safety instructions if not carried out with care might injury the operator.
1 . 2 - Before using the machine
W A R N IN G
The instructions described in this manual it is for both, IM-300P and IM-300PL. The model IM-300P
was exclusively developed for cutting plastic or wood, while the model IM-300P AL was developed for cutting only
aluminum..
W A R N IN G

Read the instructions manual before operating the equipment;

The instructions manual must be kept close to the machine with easy access and in a place
known to the operators;

Never touch any objects instead of the profile when cutting;

Wear safety goggles;

Keep hands out of the saw blade path.

Turn off the saw and unplug it from power source then wait complete stop of the saw

blades before accomplishing any adjustment and service.

Before connecting the machine to the power source it must be installed a properly circuit
breaker according to item 1.4 described in this instruction manual;

The manufacturer advise that you should make sure the circuit is properly grounded by
using the green/yellow wires for this purpose;

The machine must be mounted on a flat surface in an appropriate work area, well lighted
and enough air.

This machine only uses saw blades with the diameter of 300mm with the thickness of maximum 3.4mm.

In order to obtain high performance at work make sure that you read the instructions manual.
D A N G E R
W A R N IN G
CAUTION
INMES Industrial Ltda – Double Miter Saw IM-300PL 6