Inmes IM-300PL AL, Operator'S Manual

Page: 23 / 66

Dica:
We suggest to place a Box 01 fig. 33 (it is not included) in the output
as a way to keep the working place clean.
Fig. 33
The IM-300PL was developed for cutting profiles of 91,00mm height by 145,00mm by width according to
the graphic bellow (fig. 34).
Note: If the rebate of your profile is over than 25,00mm the maximum width capacity will be 60,00mm
as shown in fig. 33
W A R N IN G
Always use the graphic bellow to make sure the profile is suitable for the machine capacity.
Fig. 34
6. 6. 1 – Recommendations

We do recommend choosing the appropriate saw blade for each material that you intend to cut.

Always connect your equipment on a dust collecting system.
7 – MAINTENANCE
Importante:

Avoid hitting the profile
against the moulding stop in
order to misadjust it .
Importante:

In order to avoid damage in your equipment,
we do recommend using original parts from
Inmes .
W A R N IN G

Before starting any kind of maintenance and cleaning
of the machine, disconnect the power source and read
the instructions manual
INMES Industrial Ltda – Double Miter Saw IM-300PL 22