Inmes IM-300PL AL, Operator'S Manual

Page: 19 / 66

Fig. 20
W A R N IN G
Make sure the clamping system clamp the workpiece properly.
6. 4 - Blades Descent Speed Adjustments
In order to guarantee the quality of our products, every equipment are tested before leaving the factory.
However, for your own security we delivery the machines with all switches on the OFF position as shown in Fig. 21
and 22. To adjust the blade descent speed is necessary to turn the button shown in fig 21 to the position 1 and the
button shown in fig, 23 to the position of lubricant ON.
Even turning ON all switches mentioned above, for your own safety, the machine will not run. Therefore,
all necessary regulations can be made with total safety.
Fig. 21 Fig. 22 Fig. 23
Use the air regulator valve located in front of the machine as shown
in fig. 24 to increase or decrease the descend of the sawblade. The valve 01
regulates the right sawblade descend, and the valve 02 the left sawblade
descend.
1. Turning the valve counter clockwise direction will increase descend of
the sawblade.
2. Turning the valve 01 clockwise direction will decrease descend of the
sawblade.
Fig. 24
INMES Industrial Ltda – Double Miter Saw IM-300PL 18