Inmes IM-300PL AL, Operator'S Manual

Page: 47 / 66

INMES Industrial Ltda – Double Miter Saw IM-300P/ PL 50
Fig. 11 Fig. 12 Fig. 13
To assembling the left extension table, proceed on the same way described above.
12 – ASSEMBLING THE ADDITIONAL RIGHT EXTENSION TABLE
To assembling the Additional Right Extension Table proceed as follow:
1) After assembling the right extension table, position the parts 01 and 02 as shown in fig. 14.
2) With an Allen Key 5,00mm placed the screws as shown in fig. 15. Make sure do not tighten them.
3) Then position the additional right extension table as show in fig. 16.
Fig. 14 Fig. 15 Fig. 1
4) Assembly the Additional Extension Table Support 01 and then with an Allen Key 5,00mm tighten the
screws, as shown in fig. 17.
5) By using the bolts 01 (fig. 18), leveling the additional extension table.
6) Then, with a wrench of 13,00mm (it is not supplied with the machine) tighten the nut as shown in Fig. 19.
Fig. 17 Fig. 18 Fig. 19