Inmes IM-300PL AL, Operator'S Manual

Page: 11 / 66

1 . 7 - Protections
While operating the equipment:

Do not wear loose clothing, gloves or jewelry, neckties. They can caught you and draw you against the
moving parts;

Tie back long hair;

Wear ear plugs or muffs;

Always wear safety goggles;

Remember: Always remember that a careless fraction of a second is enough to cause serious injury;
1 . 8 - Before leaving the machine

Turn the saw off and wait for all moving parts stop;

Unplug the general switch;

Clean your machine for the day operation.
2 –
UNPACKING AND CHECKING CONTENTS
2. 1 – Unpacking the machine
The IM-300P is shipped from the factory packed in a wooden crate and positioned on a pallet in a vertical
position. This way it can be easy loaded or unloaded with a standard forklift.
Make sure that all items are included with your machine:
01 Double Miter Saw IM-300PL or IM-300PL AL; 01 Allen Key 6 mm;
01 Molding Stop ; 01 Allen Key 5 mm.
01 Instructions Manual; 01 Wrench 24/27 mm
Right after the wooden hood is removed from the machine, proceed as following:
1) Raise the machine using a forklift as shown in Fig. 02.
2) Using a wrench of 5/16 POL loose the bolts used to hold the
machine on the pallet
3) Then using the forklift put the machine on the ground;
4) Place the machine at the desired location and using a wrench
of 24,00mm leveling it (fig. 09).
Fig. 09
INMES Industrial Ltda – Double Miter Saw IM-300PL 10