Inmes IM-300PL AL, Operator'S Manual

Page: 62 / 66

INMES Industrial ltda – Double Miter Saw IM-300P/ PL 65
24 – ASSEMBLING THE DUST COLLECTOR
If your machine is equipped with a dust collector system, before operating it, install the equipment as fol-
low:
1) Tighten the Filter Support 01 (fig. 01);
2) With an Allen key 01 (not supplied with the machine) hold the screws as shown in fig. 02.
3) Then, with a 10,00mm wretch tighten the nut as shown in fig. 03.
Fig. 01 Fig. 02 Fig. 03
Proceed as follow to fix the filters:
Finally, connect the dust collector hose on the machine:
1) Take the hose 01, the clamp 02 and with a screwdriver (not supplied with the machine) fix the hose on the
dust collector 03 (fig. 04);
2) Proceed on the same way to fix the other side of the hose on the machine (fig. 05).
Fig. 04 Fig. 05