Inmes IM-300PL AL, Operator'S Manual

Page: 25 / 66

3) Place the wrench 01 (Fig. 38) on the nuts 02 (Fig. 38);
4) Insert the Allen Key 6 mm 03 (Fig. 38) on the central hole;
5) Loose by turning the wrench and holding the Allen Key;
Fig. 38 Fig. 39
∗
The right sawblade is loosen by turning the nut counter clockwise and the left sawblade is loosen by turning
the nut clockwise.
6) Take off the nut 02;
7) Take off the flange 04, (Fig. 39);
8) And take off the sawblade.
Before replacing the saw blade make sure to clean it and also clean it up the flange. Once this cleaning is done you
are ready to mount the blade. Proceed as follow:
1)
Sawblade;
2) Flange 04;
3) Nuts 02 (manual until the end);
4) Use wrench 01 over the nut 02;
5) Insert the Allen Key 6 mm 03 in the blade’s central hole;
6) Use the wrench 01 to tighten the nut 02 and hold the Allen Key 03, (Fig. 38);
* In order to tighten the right sawblade turn the nut clockwise and the left sawblade turn the nut counter clock-
wise.
Once you lift the upper hood you will notice a locking system. To
lower the hood proceeds as follow:
1) With your right hand push up the item 01 (Fig 40).
2) And with your left hand turn down the hood 02 (Fig. 40).
Fig. 40
INMES Industrial Ltda – Double Miter Saw IM-300PL 24