8. Display control
Ingecon
®
μWind inverters incorporate a display and keypad unit to interface with the installer
and the user.
This interface allows the display of the main internal parameters and the configuration of the
entire system during installation.
Parameters, variables and commands are organised as menus and submenus.
ESC
OK
8.1. Keypad and LEDs
The keypad has four keys:
To exit a parameter, leave a menu and returning to the next level up in the structure, to not confirm
a change or not accept a proposal.
With this key you can scroll up the list of parameters or folders within the same level or increase the
value of an editable parameter by one base unit.
With this key you can scroll down the list of parameters or folders within the same level or decrease
the value of an editable parameter by one base unit.
Serves to accept a parameter as valid, to enter a lower level menu in the structure, to confirm a
change or accept a suggestion.
The front panel has three LEDs:
Green LED
•
1 second flash: start-up procedure.
•
3 second flash: standby due to low wind level.
•
Steady: inverter connected to the grid.
Orange LED
•
0.5 second flash: the external fan is not working correctly.
•
1 second flash: the internal fan is not working correctly.
•
3 second flash: inverter limiting power due to high temperature.
•
Steady: presence of alarm.
Red LED
•
Steady: manual shutdown.
8.2. Display
The current date and time on the top line. The internal clock
automatically changes the time from summer to winter and vice
versa.
The central section provides real-time wind generator voltage,
power fed in by the inverter and grid voltage and frequency.
11:23
11/01/12
49.96Hz
229V
4567W
302V
11:23
11/01/12
49.96Hz
229V
4567W
302V
AAY2000IKI04
39
Installation manual
Ingeteam Power Technology, S.A.
Summary of Contents for Ingecon mWind 2.5
Page 1: ...Ingecon Wind Installation manual...
Page 55: ...Notes...
