Ingeteam Ingecon mWind 2.5, Installation Manual

Page: 12 / 56

1.3. Compliance with regulations
This unit can incorporate kits making it adaptable to the regulations for all European countries and countries in other
continents.
1.3.1. CE marking
CE marking is mandatory for the sale of any pro duct within the European Union, without prejudice to standards or
laws. Ingecon
®
μWind units have CE marking by reason of their compliance with the following directives:
• Low Voltage Directive 2006/95/EC
• Electromagnetic Compatibility Directive 2004/108/EC
Low Voltage Directive
Ingecon
®
μWind units comply with this directive by means of compliance with the applicable parts of harmonised
standard EN 50178 Electronic equipment for use in power installations and EN 50438 Requirements for the connec-
tion of micro-generators in parallel with public low-voltage distribution networks .
Electromagnetic Compatibility Directive
Ingecon
®
μWind units comply with this directive by means of compliance with the applicable parts of harmonised
standards:
• EN 61000-6-2 Electromagnetic Compatibility . Part 6-2: Generic standards - Immunity for industrial
environments .
• EN 61000-6-3 Electromagnetic Compatibility. Part 6-3: Generic standards - Emission for domestic
environments.
Compliance with these standards calls for compliance with limits and procedures in other standards of the same
series.
1.3.2. VDE0126-1-1 and VDE-AR-N 4105
In countries such as Germany, Portugal and France, incorporating a device of this type facilitates compliance with the
regulations in force for wind power and microgeneration facilities.
As such, our units comply with the standards:
• VDE 0126-1-1 Automatic disconnection for generating installations connected in parallel with the low voltage
grid.
• VDE-AR-N 4105 Generators connected to the low voltage distribution network.
Compliance with this standard must be requested on ordering the unit.
1.3.3. Regulations for connection to the ENEL Distribuzione grid
In Italy, to connect to the company ENEL’s grid, it is necessary to comply with the regulations the company demands.
Hence our units comply with the applicable part of standard:
• RTC alle rete BT di Enel Distribuzione
Compliance with this standard must be requested on ordering the unit.
1.3.4. Engineering Recommendations G83/1-1
In the United Kingdom there is document G83/1-1 , which recommends the characteristics a microproduction gener-
ator needs to have:
• Recommendations for the connection of small-scale embedded generators in parallel with public low-voltage
distribution networks.
Compliance with this standard must be requested on ordering the unit.
AAY2000IKI04
12
Installation manual Ingeteam Power Technology, S.A.