8.5.3. Grounding
In the case of Ingecon
®
μWind, the equipment will always be configured with no grounding, so this menu option must
not be changed.
The display should look like this:
11:23
11/01/12
grounding
ungrounded
PV+ ground
PV- ground
11:23
11/01/12
grounding
ungrounded
PV+ ground
PV- ground
8.5.4. V/f Adjustments
Press
on option
V/F ADJUSTMENT
S in the submenu
Configuration
.
Press
to display the upper and lower limit values for the voltage and frequency protections. You can browse
through the four magnitudes for the value by means of the
and
keys.
11:23
11/01/12
Configuration
CountrY/rEguLationS
grid voLtagE
grounding
v/f adJuStMEntS
auXiLiarY rELaY
11:23
11/01/12
Configuration
CountrY/rEguLationS
grid voLtagE
grounding
v/f adJuStMEntS
auXiLiarY rELaY
11:23
11/01/12
V/F ADJUSTMENTS
Fac
11:23
11/01/12
V/F ADJUSTMENTS
Fac
To change the values of these magnitudes, hold the key down
for 4 seconds. The following screen will appear, requesting a
password, in this case
Password 3
. As for the other options in
the
Configuration
submenu, enter
Password 3
(specific and non-
transferable for each inverter) and press
.
11:23
11/01/12
V/F ADJUSTMENTS
0
11:23
11/01/12
V/F ADJUSTMENTS
0
Each time
and
are pressed, four screens will appear
offering the option to change the upper and lower voltage and
frequency protection limits. Shown as an example is the screen
for changing the upper frequency limit.
Press
. The value for the maximum frequency limit can
be varied using the keys. Once you have selected the desired
value, press
.
11:23
11/01/12
V/F ADJUSTMENTS
Fac
11:23
11/01/12
V/F ADJUSTMENTS
Fac
AAY2000IKI04
45
Installation manual
Ingeteam Power Technology, S.A.
Summary of Contents for Ingecon mWind 2.5
Page 1: ...Ingecon Wind Installation manual...
Page 55: ...Notes...
