Ingersoll-Rand THERMO KING Precedent C-600, Operator'S Manual

Page: 50 / 148

50 TK 56218-2-OP-EN
Figure 39. Named Product
The YES and NO Keys confirm the product change ( Figure 40, p. 50 ). When
the desired product has been selected using the “+” and/or “-” Keys, press
the YES Key to confirm and load the new product. If the product is changed
using the “+” or “-” Keys, the change must be confirmed or rejected by
pressing the YES or NO Key within 10 seconds of changing the product. A
warning beep will sound for five seconds as a reminder.
Failure to confirm the new product by pressing Yes or No within 10 seconds
of changing the product will result in no product change. In addition, Alarm
Code 127 Setpoint Not Entered is set, to indicate that the product change
was initiated but not completed.
Figure 40. Yes and No Keys
After the YES Key has been pressed, the display briefly shows
PROGRAMMING NAMED PRODUCT - PLEASE WAIT. The display then
confirms the new setpoint for several seconds (
Figure 41, p. 51 ).
O Op pe erra attiin ng g IIn nssttrru uccttiio on nss