98
TK 56218-2-OP-EN
•
Only those modes that have been enabled will appear. Only the Cycle
Sentry Menu is enabled on factory units.
•
Not all modes may be available, depending on OptiSet Plus usage and
the settings of other programmable features.
•
To return to the Standard Display press the EXIT Key.
•
The modes shown below may be available.
Turn Cycle Sentry On or Off
Cycle Sentry Mode can be turned On or Off if Cycle Sentry Mode is allowed
by OptiSet Plus. If Cycle Sentry is turned off, the unit runs in Continuous
mode, unless Continuous Mode is not allowed by OptiSet Plus. Either Cycle
Sentry or Continuous operation can be disabled via OptiSet Plus. From the
Main Menu > Change Mode menu choose Turn On/Off Cycle Sentry Mode
and press the SELECT Soft Key (
Figure 120.
Select Key
If the unit is running in Cycle Sentry Mode, press the SELECT Soft Key
(
) to turn off Cycle Sentry Mode as shown.
Figure 121.
Select Key
Confirmation screens will appear briefly, the unit will switch to Continuous
Mode operation and the Cycle Sentry Icon will disappear.
