TK 56218-2-OP-EN
51
Figure 41.
New Named Product
If the NO Key is pressed the display will briefly show SETPOINT NOT
CHANGED and return to the Standard Display. The Standard Display will
show the old setpoint.
The display then returns to the Standard Display showing the new named
product. Notice that the arrow points down, to indicate that the unit is
cooling (
Figure 42.
Standard Display
IIm
mp
po
orrtta
an
ntt:: If the named product is changed using the “+” or “-” Keys, the
change must be confirmed or rejected by pressing the YES or
NO Key within 10 seconds of changing the named product.
•
If the YES Key is pressed, the product change made with the “+” or “-”
Key is accepted, the product changes, and the display returns to the
Standard Display.
•
If the NO Key is pressed the product change made with the “+” or “-”
Key is not accepted, the product is not changed, and the display returns
to the Standard Display.
•
If the YES or NO Key is not pressed within 10 seconds of making a
change with the “+” or “-” Key, the product is not changed and the
display returns to the Standard Display. The display briefly shows
