TK 56218-2-OP-EN
139
Pretrip
Every
1,500
Hours
Every
3,000
Hours*
Annual/
4,500
Hours
Inspect/Check/Service These Items
•
Change engine oil and oil filter (hot).
C-600 Only –
Requires oil with API Classification CJ-4 or CK-4
(ACEA Rating E6 for Europe).
Important:
This oil type must be used to meet Federal Regulations
based on EPA 40 CFR Part 89.
S-600 and S-700 Only –
Requires API Classification CJ-4 or CK-4.
Important:
This oil type must be used together with ULSD fuel to
prevent damage to the DOC.
•
Adjust engine valve clearance.
•
C-600 Only –
Test fuel injection nozzles at least every 3,000 hours.
Based on EPA 40 CFR Part 89.
—
Change ELC (red) engine coolant every 5 years or 12,000 hours.
Units equipped with ELC have an ELC nameplate on the expansion
tank (see “Engine Cooling System”).
—
Replace fuel return lines between fuel injection nozzles every 10,000
hours.
Note:
Units equipped with Severe Duty Filtration Package - Replace air cleaner element,
replace fuel filter/water separator, and change engine oil and oil filter every 4,000
hours.
Electrical:
•
•
•
Inspect battery terminals and electrolyte level.
•
•
•
Inspect wire harness for damaged wires or connections.
•
•
•
Inspect AC generator and alternator wire connections for tightness.
•
Inspect electric motors.
•
Inspect and, if required, re-torque all electrical connections on the
contactors in the Fan Control Box to 15 in-lb (1.7 N•m).
