48
TK 56218-2-OP-EN
Figure 35.
New Setpoint
If the NO Key is pressed the display will briefly show SETPOINT NOT
CHANGED and return to the Standard Display. The Standard Display will
show the old setpoint.
The display then returns to the Standard Display showing the new setpoint.
Notice that the arrow now points up to indicate that the unit is heating
(
).
Figure 36.
Up Arrow
IIm
mp
po
orrtta
an
ntt:: If the setpoint is changed using the “+” or “-” Keys, the change
must be confirmed or rejected by pressing the YES or NO Key
within 10 seconds of changing the setpoint.
•
If the YES Key is pressed, the setpoint change made with the “+” or “-”
Key is accepted, the setpoint changes, and the display returns to the
Standard Display.
•
If the NO Key is pressed the setpoint change made with the “+” or “-”
Key is not accepted, the setpoint is not changed, and the display returns
to the Standard Display.
•
If the YES or NO Key is not pressed within 10 seconds of making a
change with the “+” or “-” Key, the setpoint is not changed and the
display returns to the Standard Display. The display briefly shows
