Ingersoll-Rand THERMO KING Precedent C-600, Operator'S Manual

Page: 45 / 148

TK 56218-2-OP-EN 45
Numerical Setpoints
If OptiSet Plus is not in use or if only Numerical Setpoints are enabled, the
left soft key will be labeled SETPOINT (
Figure 28, p. 45 ).
Figure 28. SETPOINT
Named Products - OptiSet Plus
OptiSet Plus allows the use of Named Products such as APPLES or
BANANAS in place of a numerical setpoint. If only named products are
enabled, the left soft key will be labeled PRODUCT (
Figure 29, p. 45 ).
• A single setpoint temperature may be allowed for the specific named
product.
• A numerical setpoint range may be allowed for the specific named
product.
Figure 29. Left Soft Key Labeled “PRODUCT”
Both Numerical Setpoints and Named Products
OptiSet Plus can allow the use of both Numerical Setpoints and Named
Products. If both numerical setpoints and named products are enabled, the
left soft key will be labeled PRODUCT/SETPOINT (
Figure 30, p. 46 ).
O Op pe erra attiin ng g IIn nssttrru uccttiio on nss