Ingersoll-Rand THERMO KING Precedent C-600, Operator'S Manual

Page: 54 / 148

54 TK 56218-2-OP-EN
Starting the Electric Motor
C CA AU UT TIIO ON N
R Riisskk o off IIn njju urry y!!
The motor may start automatically any time the unit is turned on.
N No otte e:: Units equipped with the SmartPower option only.
E Elle eccttrriicc P Po ow we err R Re ecce ep ptta acclle e:: The electric power receptacle is used to connect
the unit to an appropriate electric power source for electric standby
operation (
Figure 46, p. 54 ). The electric power receptacle is located next to
the HMI Control Panel. Verify the unit and the power supply are turned off
before connecting or disconnecting a power cord.
Figure 46. Electric Power Receptacle
Electric motor starting is automatic in both Continuous Mode and Cycle
Sentry Mode. The motor will start as required when the unit is turned on. If
any keys are being pressed on the HMI Control Panel prior to the motor start,
the motor start will be delayed until 10 seconds after the last key is pressed.
When the motor is preparing to start, the HMI Control Panel will display the
motor start screen (
Figure 47, p. 54 ). The preheat buzzer sounds for 20
seconds before the electric motor starts.
Figure 47. Motor Start Screen
O Op pe erra attiin ng g IIn nssttrru uccttiio on nss