Ingenico i5100, Operating Manual

Page: 13 / 72

11 Dial-up EFTPOS Merchant Operating Guide – May 2011
Access to these functions can be limited at your discretion.
You are responsible for protecting this password against unauthorised use.
You (as the authorised signatory) will need to contact the EFTPOS Helpdesk
to change your passwords on 1300 603 266.
Refund, Settlement, Void and Terminal passwords will have a default setting
(unless nominated by you at the time of application) when you receive
your terminal(s).
3.5 User Management Code
(See User Guide section 6.0).
The USER MANAGEMENT code is only used when the SHIFT feature is enabled
on the terminal. Each “user” must be assigned a “user ID”. The user cannot log
in or out of a shift without using the USER MANAGEMENT code. Up to 10 users
IDs can be programmed into the terminal.
The User Management code is selected by the user at a time the “user ID”
is being established on the terminal (generally at the start of the shift).
The code is a four digit number nominated by the user.