Ingenico i5100 Operating Manual Download Page 15 | Manualshive

Page: 15 / 72

background image

13

Dial-up EFTPOS Merchant Operating Guide – May 2011

4.2 Swiping a Magnetic Stripe Card

The magnetic stripe reader is located on the right hand side of the terminal.

1. Check the terminal is displaying the message INSERT/SWIPE CARD.

2. Hold the card upside-down with the magnetic strip facing inwards.

3. Swipe the card smoothly through the card reader, in either direction. Ensure
the whole magnetic strip is swiped through the reader.

4. If there is no response from the terminal, or CARD ERROR message is

displayed, swipe the card again. You might need to swipe faster or slower.

4.3 Damaged Cards

If a credit card will not read, when inserted in the chip card reader or when
swiped, while performing a credit account transaction, the manual key process
should not be used.

Warning: Where the manual key process has been used to perform a credit
card transaction (contrary to the MOTO or ECOM instructions outlined in
section 5.8, How to Process a MOTO/ECOM Transaction), and that transaction
is subsequently disputed by the cardholder, the merchant will be liable for the
amount of the transaction.

A manual fall back voucher can be used to fulfil the sale as per the instructions
outlined in section 8.2, Manual Fall Back.

The option of completing a manual voucher ONLY applies to credit account
transactions where the credit card will not read.

«
...
13
14
15
16
17
...
»

Summary of Contents for i5100









































































Reviews:

No comments

Related manuals for i5100

Brand: Optomany Pages: 69

Brand: AURES Pages: 38

Brand: Eagle Pages: 2

Brand: FingerTec Pages: 5

AKI-CDC-MOD-12T

Brand: Kollmorgen Pages: 36

Brand: Hisense Pages: 18

Brand: Worth Data Pages: 103

Brand: GIETEK Pages: 34

Brand: BBPOS Pages: 2

Terminal Block NI TB-2706

Brand: National Instruments Pages: 8

Brand: Russound Pages: 2

Brand: Crestron Pages: 4

Brand: 3M Pages: 8

Brand: 3M Pages: 14

Brand: Pundi X Pages: 19

Brand: SCM Pages: 9

Brand: wallee Pages: 6

Brand: POSBank Pages: 150

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands