Triton Go Product Manual |
Wiring and Connections
INGENIA | 05/29/2017
91
Max working
frequency
1 kHz
Next figure shows digital output circuit model.
Wiring of 5V loads
Loads that require 5V as high-level voltage can be connected directly to the digital output. A wiring example for
GPO1 is shown in the next figure (same wiring could be used for GPO2, GPO3 or GPO4).
Non-isolated I/O
Triton Go Inputs and outputs are not isolated.
The ground of the Triton Go Servo Drive and the ground
of the devices connected to I/Os must be the same. Otherwise inputs or outputs may be damaged.
