INGENIA Triton Go, Product Manual

Page: 40 / 119

Triton Go Product Manual | Connectors Guide
INGENIA | 05/29/2017 40
41
http://www.mouser.es/ProductDetail/Molex/51110-1056/?qs=
%2fha2pyFaduiMjkvwWmWuOZy0mFhuCLeDSv3wJ9%2f1J325nRN%2fRFKKgQ%3d%3d
5 RX-
RS485 receive data - (should be connected to master TX-)
6 TX-
RS485 transmit data - (should be connected to master RX-)
Notes
• The Triton does not include any termination resistors to the RX or TX signals.
• The interface is full-duplex without specific data control and totally compatible with serial RS422.
• Please see Communications
(see page 104)
page for further information
Mating
Descriptio
n
2.00mm Pitch, Milli-Grid ™ Receptacle Housing, 6 Circuits, with Center Locking Ramp and
Side Polarization Keys.
Image
Part
number Molex 51110-0656
Distributor
code
Mouser 538-51110-0656
41
Notes
• Triangle on the bottom left indicates pin 1.
• See Milli-Grid connectors mating
(see page 25)
for further information about crimping terminals and
cables.
Do not confuse with STO connector
RS485 and STO have the same number of pins. Take due precautions not to connect them
incorrectly.

Hardware revision 1.0.0
RS485 was not available in hardware revision 1.0.0.
