Everest CORE - Product Manual |
Pinout
INGENIA | 08/01/2019
16
•
"NC" means Not Connected. Pins marked with NC can be tied to GND or 3.3 V,
but best practice is to leave
them unconnected.
•
"DNC" means Do Not Connect. Pins marked with DNC must not be tied to any driving voltage, including GND
or 3.3 V.
• "CLL" means Connect to Low Level. Pins marked with CLL must be tied or pulled-down to 0 V.
• "CHL" means Connect to High Level. Pins marked with CHL must be tied or pulled-up to 3.3 V.
Manufacturer Everest CORE
connector
Required mating
connector
Description
Hirose Electric
60-pin mezzanine stacking board
connector. 0.5 mm pitch. Center strip, gold-
plated surface mount contacts. 3 mm
stacking height.
5.4. P4 Everest CORE Interface connector
Although using the same physical connector as
(EVE-NET), position and pinout is different in Everest
CORE (EVE-CORE).
P4 Everest CORE Interface connector
#
Signal
name
Description
Type
#
Signal
name
Description
Type
1
GND_D
Digital signal Ground.
Power
2
GND_D
Digital signal Ground.
Power
